CHAPTER 8
Settings
• Settings Menu, on page 55
• Set the Ring Volume for an Incoming Call, on page 70
• Change the Volume on a Call, on page 70
Settings Menu
Audio Settings
Set Silent Mode from the Settings Menu
You can stop the handset from ringing where there is an incoming call. This is called silent mode.
When the handset is in silent mode, incoming calls display on the screen, but the handset does not play a
ringtone.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio Settings.
Step 3 Highlight Silent.
Step 4 Press Off to allow the handset to ring or press On to disable ringing.
Set the Ring Volume from the Settings Menu
You can change the volume of the ringer. This volume does not impact the volume level when you are on a
call.
Cisco IP DECT 6800 Series User Guide
55
To Next Page
Loading...
