Cisco IP DECT 210 - Change the Settings PIN; Set the Handset Name; Set Auto Answer

Unlock the Handset Keypad, on page 3
Change the Settings PIN
You can set the handset to require a PIN before the handset can reset to the default settings.
The default PIN is 0000.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Security > Change PIN.
Step 3 Enter the current PIN and press OK.
Step 4 Enter a new PIN and press OK.
You must use four digits for the PIN.
Step 5 Press Select to save the setting.
Set the Handset Name
You can give the handset a name. The name displays on the main screen of the handset.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Handset name.
Step 3 Enter a name using the keypad.
Step 4 (Optional) If you need special symbols, press Symbol, navigate to the required symbol, and press Select.
Step 5 (Optional) If you want to delete the last character, press Clear.
Step 6 Press Save.
Set Auto Answer
You can set the way that the handset handles incoming calls.
Cisco IP DECT 6800 Series User Guide
63
Settings
Change the Settings PIN