Cisco MDS 9000 Configuration Guide

Send documentation comments to mdsfeedback-doc@cisco.com
5-6
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
OL-7765-02
Chapter 5 Configuring Zones and Zone Sets
Creating Zone Sets
Figure 5-7 Zone 2 has been dragged to Zone Set 4
Step 6
After creating a zone set, you must activate it to take effect. Click a zone set to activate it or right-click
the zone set and select Activate (see Figure 5-8). This configuration is distributed to the other switches
in the network fabric.
Note When you confirm the activate operation, the current running configuration is saved to the
startup configuration. This permanently saves any changes made to the running configuration
(not just zoning changes).
Figure 5-8 Activation
After creating a zone set and activating it, make sure you save the configuration file. See Appendix C,
“Configuration Files,” for details about copying and saving configuration files.

Cisco MDS 9000 Specifications

General

Brand	Cisco
Model	MDS 9000
Category	Switch
Language	English