• Press and hold for more than 10 sec: To force the unit into a full factory restore.
Ports and Status Indicators
The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.
Additional functions are described below, from left to right.
Item Function LED Status Meaning
1 Restore N/A
Restore button to clear
switch IP and local
configuration settings
2 Fan Orange
One or more of the
system fans has
malfunctioned or is
missing
3 Power (PSU) Orange
One of the system
PSUs (power supplies)
has malfunctioned or is
missing
2
Status Orange
Switch is unable to or
has not yet connected
to the Meraki cloud
Flashing green
Firmware upgrade in
process
White
Switch is fully
operational and
connected to the
Meraki cloud
Rainbow
Switch is booting,
searching for uplink to
Meraki Cloud
Off
Switch does not have
power
3
To Next Page
Loading...
Need help?
General