Cisco NCS 540 Series Routers

Examples
This example shows how to specify class1 as the name of a class and defines a class map for this
class. The packets that match the access list 1 are matched to class class1.
RP/0/RP0/CPU0:router(config)# class-map class1
RP/0/RP0/CPU0:router(config-cmap)# match access-group ipv4 1
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
5
QoS Classification Commands
class-map