Cisco NCS 540 Series Routers

Congestion Management Commands
All commands applicable for the Cisco NCS 5500 Series Router are also supported on the Cisco NCS 540
Series Router that is introduced from Cisco IOS XR Release 6.3.2. References to earlier releases in Command
History tables apply to only the Cisco NCS 5500 Series Router.
Note
This chapter describes the commands used to manage congestion.
• decapsulate gre, on page 42
• police rate, on page 43
• policy-map, on page 45
• priority (QoS), on page 47
• vrf-policy, on page 48
• show qos interface , on page 49
• show policy-map interface, on page 55
• show policy-map targets, on page 60
• show policy-map type pbr, on page 62
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
41