Cisco NCS 540 Series Routers User Manual

hw-module profile stats qos-enhanced
To enable the four counter mode in the system, use the hw-module profile stats qos-enhancedcommand in
XR Config mode. To disable this mode, use the no form of the command. In the four counter mode, statistics
for conform, violate, and exceed packets are collected in the hardware and displayed using the show policy-map
command.
hw-module profile stats qos-enhanced
Syntax Description
This command has no keywords or arguments.
Command Default
The qos-enhanced mode is disabled by default, and therefore only the conform and violate statistics are
available in the two counter mode.
Command Modes
XR Config mode
Command History
ModificationRelease
This command was introduced.Release
6.2.1
Usage Guidelines
The router must be reloaded for the hw-module command to be functional.
Task ID
OperationTask
ID
read,
write
qos
The following example shows how to enable the four counter mode on the router.
RP/0/RP0/CPU0:router#config
RP/0/RP0/CPU0:router(config)#hw-module profile stats qos-enhanced
RP/0/RP0/CPU0:router(config)#commit
RP/0/RP0/CPU0:router# reload
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
10
QoS Classification Commands
hw-module profile stats qos-enhanced

Cisco NCS 540 Series Routers Specifications

General

Brand	Cisco
Model	NCS 540 Series Routers
Category	Network Router
Language	English