Cisco Nexus 6000 Series - Page 149

DescriptionCommand
Displays details of MVR members on the specified
interface.
If this is a 10G breakout port, the slot/port
syntax is QSFP-module/port.
Note
show mvr members interface {ethernet type
slot/port | port-channel number}
Displays details of MVR members on the specified
VLAN.
show mvr members vlan vlan-id
Displays all MVR receiver ports on all interfaces or
on the specified interface.
If this is a 10G breakout port, the slot/port
syntax is QSFP-module/port.
Note
show mvr receiver-ports [ethernet type slot/port |
port-channel number]
Displays all MVR source ports on all interfaces or on
the specified interface.
If this is a 10G breakout port, the slot/port
syntax is QSFP-module/port.
Note
show mvr source-ports [ethernet type slot/port |
port-channel number]
This example shows how to verify the MVR parameters:
switch# show mvr
MVR Status : enabled
Global MVR VLAN : 100
Number of MVR VLANs : 4
This example shows how to verify the MVR group configuration:
switch# show mvr groups
* - Global default MVR VLAN.
Group start Group end Count MVR-VLAN Interface
Mask
------------- --------------- ------ -------- -----------
228.1.2.240 228.1.2.255 /28 101
230.1.1.1 230.1.1.4 4 *100
235.1.1.6 235.1.1.6 1 340
225.1.3.1 225.1.3.1 1 *100 Eth1/10
This example shows how to verify the MVR interface configuration and status:
switch# show mvr interface
Port VLAN Type Status MVR-VLAN
---- ---- ---- ------ --------
Po10 100 SOURCE ACTIVE 100-101
Po201 201 RECEIVER ACTIVE 100-101,340
Po202 202 RECEIVER ACTIVE 100-101,340
Po203 203 RECEIVER ACTIVE 100-101,340
Po204 204 RECEIVER INACTIVE 100-101,340
Po205 205 RECEIVER ACTIVE 100-101,340
Po206 206 RECEIVER ACTIVE 100-101,340
Po207 207 RECEIVER ACTIVE 100-101,340
Po208 208 RECEIVER ACTIVE 2000-2001
Eth1/9 340 SOURCE ACTIVE 340
Eth1/10 20 RECEIVER ACTIVE 100-101,340
Eth2/2 20 RECEIVER ACTIVE 100-101,340
Eth102/1/1 102 RECEIVER ACTIVE 100-101,340
Eth102/1/2 102 RECEIVER INACTIVE 100-101,340
Eth103/1/1 103 RECEIVER ACTIVE 100-101,340
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
131
Configuring MVR
Verifying the MVR Configuration