Link length supported for 62.5/125mm fiber is 0 m(s)
cisco id is --
cisco extended id number is 4
Verifying the Chassis Management Information
Use the following to display configuration information used on the switch supervisor to manage the Fabric
Extender.
PurposeCommand or Action
Displays the environmental sensor status.
show environment fex {all | FEX-number}
[temperature | power | fan]
Displays inventory information for a Fabric Extender.
show inventory fex FEX-number
Displays module information about a Fabric Extender.
show module fex [ FEX-number ]
Displays the contents of the serial PROM (SPROM)
on the Fabric Extender. The unit of the power for the
show sprom command is displayed in centi-amperes.
show sprom fex FEX-number {all | backplane |
powersupply ps-num} | all
Configuration Examples for Chassis Management
This example shows how to display the module information about all connected Fabric Extender units:
This example shows how to display the inventory information about a specific Fabric Extender:
switch# show inventory fex 101
NAME: "FEX 101 CHASSIS", DESCR: "N2K-C2248TP-1GE CHASSIS"
PID: N2K-C2248TP-1GE , VID: V00 , SN: SSI13380FSM
NAME: "FEX 101 Module 1", DESCR: "Fabric Extender Module: 48x1GE, 4x10GE Supervisor"
PID: N2K-C2248TP-1GE , VID: V00 , SN: JAF1339BDSK
NAME: "FEX 101 Fan 1", DESCR: "Fabric Extender Fan module"
PID: N2K-C2248-FAN , VID: N/A , SN: N/A
NAME: "FEX 101 Power Supply 2", DESCR: "Fabric Extender AC power supply"
PID: NXK-PAC-400W , VID: 000, SN: LIT13370QD6
This example shows how to display the environment status for a specific Fabric Extender:
switch# show environment fex 101
Temperature Fex 101:
-----------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
-----------------------------------------------------------------
1 Outlet-1 60 50 33 ok
1 Outlet-2 60 50 38 ok
1 Inlet-1 50 40 35 ok
1 Die-1 100 90 44 ok
Fan Fex: 101:
------------------------------------------------------
Fan Model Hw Status
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
174
Configuring the Fabric Extender
Verifying the Chassis Management Information