Cisco Nexus 6000 Series - Verifying the Connection to the Vcenter Server

Veth32776 Eth1/20 14 sample
Veth32777 Eth1/20 15 sample
Total 9 Veth interfaces
switch-1#
Verifying the Connection to the vCenter Server
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Displays the current SVS connections.
show svs connections [svs-name]
Step 2
This example shows how to display the details of the SVS connection:
switch-1# configure terminal
switch-1(config)# show svs connections
Local Info:
-----------
connection 2VC:
ip address: 192.0.20.125
remote port: 80
vrf: management
protocol: vmware-vim https
certificate: default
datacenter name: DC1
extension key: Cisco_Nexus_6004_1945593678
dvs name: Pod1
DVS uuid: cd 05 25 50 6d a9 a5 c4-eb 9c 8f 6b fa 51 b1 aa
config status: Enabled
operational status: Connected
sync status: in progress
version: VMware vCenter Server 6.0.2 build-388657
Peer Info:
----------
hostname: -
ip address: -
vrf:
protocol: -
extension key: Cisco_Nexus_6004_1945593678
certificate: default
certificate match: TRUE
datacenter name: DC1
dvs name: Pod1
DVS uuid: cd 05 25 50 6d a9 a5 c4-eb 9c 8f 6b fa 51 b1 aa
config status: Disabled
operational status: Connected
switch-1(config)#
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
198
Configuring VM-FEX
Verifying the Connection to the vCenter Server