EasyManua.ls Logo

Cisco Nexus 6000 Series - Page 209

Cisco Nexus 6000 Series
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PurposeCommand or Action
Disables local traffic on the interface.shutdown
Step 3
Shutting down the interface before enabling
VN-Tag mode prevents the dynamic creation of
a fixed vEthernet interface.
Note
Enables port extender support on the interface.switchport mode vntag
Step 4
Enters interface configuration mode for the second
Ethernet port.
interface ethernet slot/port
Step 5
If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Note
Disables local traffic on the interface.shutdown
Step 6
Enables port extender support on the interface.switchport mode vntag
Step 7
Enters configuration mode for the first virtual interface
for the first Ethernet port.
interface vethernet
interface-number
Step 8
Binds the virtual interface to the physical interface and
the specified port channel.
bind interface ethernet slot/port
channel channel-number
Step 9
The port channel numbers of the virtual interfaces
must match those configured on the vNICs.
Note
If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Note
Enables local traffic on the interface.no shutdown
Step 10
Enters configuration mode for the second virtual interface
for the first Ethernet port.
interface vethernet
interface-number
Step 11
Binds the virtual interface to the physical interface and
the specified port channel.
bind interface ethernet slot/port
channel channel-number
Step 12
If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Note
Enables local traffic on the interface.no shutdown
Step 13
Enters configuration mode for the first virtual interface
for the second Ethernet port.
interface vethernet
interface-number
Step 14
Binds the virtual interface to the physical interface and
the specified port channel.
bind interface ethernet slot/port
channel channel-number
Step 15
If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Note
Enables local traffic on the interface.no shutdown
Step 16
Enters configuration mode for the second virtual interface
for the second Ethernet port.
interface vethernet
interface-number
Step 17
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
191
Configuring VM-FEX
Configuring the Fixed Static Interfaces

Table of Contents

Related product manuals