Cisco Nexus 6000 Series - Page 220

PurposeCommand
Displays the running configuration information related
to the template manager. Displays the currently
applied non-default stm/hrt template. If the default
template is applied, nothing is displayed here.
show running-config hardware profile route
resource template
Displays the startup configuration information related
to the template manager. When entering the copy
running-config startup-config command, the
currently applied non-default stm/hrt template is
displayed. If the default template is applied, nothing
is displayed.
show startup-config hardware profile route
resource template
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
202
Configuring MAC/ARP Hardware Resource Carving Template
Verifying the MAC/ARP Hardware Resource Carving Template Configuration