Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
reload module
HACR-9
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
reload module
To reload a module in the device, use the reload module command.
reload module slot [force-dnld]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
Command History
Usage Guidelines You can use the reload module command only in the default virtual device context (VDC).
To display information about the hardware on your device, use the show hardware command.
This command does not require a license.
Examples This example shows how to reload a module:
switch# reload module 2
Related Commands
slot Chassis slot number. The slot range depends on the system.
force-dnld (Optional) Forces the download of software to the module.
Release Modification
4.0(1) This command was introduced.
Command Description
show version Displays the software version that is currently running on the system.
To Next Page
Loading...
