Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
system hap-reset
HACR-19
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
system hap-reset
To enable the Supervisor Reset High Availability (HA) policy, use the system hap-reset command.
system hap-reset
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
You configure switchover and high availability (HA) policies for a virtual device context (VDC) when
you create the VDC.
Examples This example shows how to enable the Supervisor Reset HA policy:
switch(config)# system hap-reset
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system no hap-reset Disables the heartbeat checks and reverts to the factory default.
To Next Page
Loading...
