Cisco Nexus 7000 - Related Documentation

Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
show boot
HACR-10
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
show boot
To display the boot variables in the startup configuration, use the show boot command.
show boot
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the boot variables in the startup configuration:
switch(config)# show boot
Current Boot Variables:
sup-1
kickstart variable = bootflash:/n7000-s1-kickstart.4.1.5.gbin.S1
system variable = bootflash:/n7000-s1-dk9.4.1.5.gbin.S1
sup-2
kickstart variable = bootflash:/n7000-s1-kickstart.4.1.5.gbin.S1
system variable = bootflash:/n7000-s1-dk9.4.1.5.gbin.S1
No module boot variable set
Boot Variables on next reload:
sup-1
kickstart variable = bootflash:/n7000-s1-kickstart.4.1.5.gbin.S1
system variable = bootflash:/n7000-s1-dk9.4.1.5.gbin.S1
sup-2
kickstart variable = bootflash:/n7000-s1-kickstart.4.1.5.gbin.S1
system variable = bootflash:/n7000-s1-dk9.4.1.5.gbin.S1
No module boot variable set
switch(config)#
Release Modification
4.2 This command was introduced.