Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
show system redundancy
HACR-14
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
show system redundancy
To display the system redundancy status, use the show system redundancy command.
show system redundancy [ha] status
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the system redundancy status:
switch# show system redundancy status
Redundancy mode
---------------
administrative: HA
operational: None
This supervisor (sup-1)
-----------------------
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Other supervisor (sup-2)
------------------------
Redundancy state: Not present
switch#
ha (Optional) Displays the virtual device context (VDC) redundancy (high
availability) status.
Release Modification
4.0(1) This command was introduced.
To Next Page
Loading...
