Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
show system cores
HACR-13
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
show system cores
To display the core filename, use the show system cores command.
show system cores
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines To configure the system core filename, use the show system cores command.
This command does not require a license.
Examples This example shows how to display the core filename:
switch(config)# show system cores
Cores are transferred to slot0:
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system cores Configures the system core filename.
To Next Page
Loading...
