Cisco Nexus 7000 - System Switchover

Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
system switchover
HACR-22
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
system switchover
To switch over to the standby supervisor, use the system switchover command.
system switchover
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to switch over to the standby supervisor:
switch# system switchover
switch#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show system redundancy Displays the system redundancy status.