Send document comments to nexus7k-docfeedback@cisco.com
Cisco Nexus 7000 Series NX-OS High Availability Commands
show system redundancy
HACR-15
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
OL-23374-01
This example shows how to display the VDC redundancy status:
switch# show system redundancy ha status
VDC No This supervisor Other supervisor
------ --------------- ---------------
vdc 1 Active with no standby N/A
vdc 2 Active with no standby N/A
vdc 3 Active with no standby N/A
vdc 4 N/A N/A
switch#
Related Commands Command Description
system hap-reset Enables the Supervisor Reset HA policy.
To Next Page
Loading...
