EasyManua.ls Logo

Cisco Nexus 7710 - Page 120

Cisco Nexus 7710
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Action to be performed
Check the image version. The release versions of the supervisor-3E kickstart and system images provided
should be the same as the existing supervisor-2E kickstart and system images.
Problem
Unable to retrieve the chassis information. The following syslog message is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Chassis information retrieve failed,
aborting migration ...
Action to be performed
Use the migrate sup kickstart <sup3-kickstart-image> system <sup3-system-image> command again.
Problem
Unable to retrieve the slot number of the supervisor module. The following syslog message is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Supervisor slot information retrieve
failed, aborting migration ...
Action to be performed
Use the migrate sup kickstart <sup3-kickstart-image> system <sup3-system-image> command again.
Problem
Unable to retrieve the slot number of the standby supervisor module. The following syslog message is
displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Standby Supervisor slot information
retrieve failed, aborting migration ...
Action to be performed
Use the migrate sup kickstart <sup3-kickstart-image> system <sup3-system-image> command again.
Problem
The Cisco Nexus 7702 switch does not support nondisruptive migration from the supervisor-2E module
to a supervisor-3E module. In case the migrate sup kickstart <sup3-kickstart-image> system
<sup3-system-image> command is used on a Cisco Nexus 7702 switch, the following syslog message
is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Migration is not supported in N7702
chassis, aborting migration ...
Action to be performed
None. The migrate sup kickstart <sup3-kickstart-image> system <sup3-system-image> command is
not supported on a Cisco Nexus 7702 switch.
Problem
In case the migrate sup kickstart <sup3-kickstart-image> system <sup3-system-image> command
cannot read the stored Supervisor 2E image links, the migration process fails. The following syslog
messages are displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Kickstart image link for Active
Supervisor-2 (N77-SUP2E) could not be found, aborting migration ...
<Tue Apr 30 10:02:47 2019> Please set the boot parameters using 'boot kickstart
<kickstart_image>' and 'boot system <system_image>'
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
OL-30452-01.108
Installing or Replacing Modules, Fan Trays, and Power Supplies
Troubleshooting

Table of Contents

Related product manuals