Cisco Nexus 7710 - 100-Gb QSFP+ Transceiver Specifications

100-Gb QSFP+ Transceiver Specifications
The 100-Gigabit QSFP+ transceivers are used with the M3-Series 100-Gigabit I/O module (N77-M312CQ-26L)
and the F4-Series 100-Gigabit Ethernet I/O module (N77-F430CQ-36). These I/O modules support Forward
Error Correction (FEC) with the 100-Gigabit QSFP+ transceivers. For more information, refer FEC Support
on Optic Modules.
Note
For the cable specifications that apply to these transceivers, see the following table.
Maximum Cable
Distance
Modal
Bandwidth
(MHz-km)
Core Size
(microns)
Wavelength
(nm)
Connector TypeCable TypeTransceiver
230 feet (70 m) over
OM3 Multimode Fiber
328 feet (100 m) over
OM4 Multimode Fiber
2000 (OM3)
4700 (OM4)
50.0
50.0
85012-fiber MPOMMFQSFP-100G-SR4-S
6.21 miles (10 km)—G.6521295, 1300,
1304, 1309
LC DuplexSMFQSFP-100G-LR4-S
1.24 miles (2 km)—G.6521271, 1291,
1311, 1331
LC DuplexSMFQSFP-100G-CWDM4-S
1640 feet (500 m)—G.652131012-fiber MPOSMFQSFP-100G-PSM4-S
3.3 feet (1 m)
6.6 feet (2 m)
9.8 feet (3 m)
16.4 feet (5 m)
23 feet (7 m)
33 feet (10 m)
49.4 feet (15 m)
65.6 feet (20 m)
82 feet (25 m)
98.4 feet (30 m)
———QSFP+ to
QSFP+
Active optical
cable
QSFP-100G-AOCxM
230 feet (70 m)
328 feet (100m)
2000 (OM3)
4700 (OM4)
50.0
50.0
855, 908LCMMFQSFP-40/100-SRBD
For the optical specifications, see the following table.
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
OL-30452-01.158
Switch Specifications
100-Gb QSFP+ Transceiver Specifications