Cisco Nexus 7710 - 100-Gb CPAK Transceiver Specifications

Cable TypeTransceiver or ConnectorPort Type
QSFP-100G-AOC1M
QSFP-100G-AOC2M
QSFP-100G-AOC3M
QSFP-100G-AOC5M
QSFP-100G-AOC7M
QSFP-100G-AOC10M
QSFP-100G-AOC15M
QSFP-100G-AOC20M
QSFP-100G-AOC25M
QSFP-100G-AOC30M
QSFP-H40G-AOC1M
QSFP-H40G-AOC2M
QSFP-H40G-AOC3M
QSFP-H40G-AOC5M
QSFP-H40G-AOC7M
QSFP-H40G-AOC10M
QSFP-H40G-AOC15M
100-Gb CPAK Transceiver Specifications
The 100-Gigabit CPAK transceivers are used with the F3-Series 100-Gigabit I/O module (N77-F312CK-26).
For the cable specifications that apply to these transceivers, see the following table.
Maximum Cable
Distance
Modal Bandwidth
(MHz-km)
Core Size
(microns)
Wavelength
(nm)
Connector
Type
Cable
Type
Transceiver
6.21 miles (10 km)—G.6521310LC DuplexSMFCPAK-100G-LR4
328 feet (100 m)
492 feet (150 m)
2000 (OM3)
4700 (OM4)
50.0
50.0
85024-fiber
MPO/MTP
MMFCPAK-100G-SR10
For the environmental specifications, see the following table.
SpecificationParameter
–40 to 158°F (–40 to 70°C)Storage temperature
32 to 104°F (0 to 40°C)Operating temperature
5 to 95 percent, noncondensingStorage relative humidity
5 to 90 percent, noncondensingOperating relative humidity
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
157OL-30452-01.
Switch Specifications
100-Gb CPAK Transceiver Specifications