Cisco Nexus 7710 - Displaying Environmental Information

Block Signature : 0x6001
Block Version : 3
Block Length : 39
Block Checksum : 0x268
Feature Bits : 0x0
HW Changes Bits : 0x0
Stackmib OID : 0
MAC Addresses : 00-1b-54-c2-1e-00
Number of MACs : 128
OEM Enterprise : 9
OEM MIB Offset : 5
MAX Connector Power: 0
WWN software-module specific block:
Block Signature : 0x6005
Block Version : 1
Block Length : 0
Block Checksum : 0x66
wwn usage bits:
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
...
00 00 00 00 00 00 00 00
00 00
License software-module specific block:
Block Signature : 0x6006
Block Version : 1
Block Length : 16
Block Checksum : 0x77
lic usage bits:
00 00 00 00 00 00 00 00
Second Serial number specific block:
Block Signature : 0x6007
Block Version : 1
Block Length : 28
Block Checksum : 0x312
Serial Number : TBM11476798
switch#
Displaying Environmental Information for a Switch
You can display all of the environment-related switch information by using the show environment command.
Enter the show environment command.
Example:
switch# show environment
Power Supply:
Voltage: 50 Volts
Power Actual Total
Supply Model Output Capacity Status
(Watts ) (Watts )
------- ------------------- ----------- ----------- --------------
1 N77-AC-3KW 538 W 3000 W Ok
2 N77-AC-3KW 543 W 3000 W Ok
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
53OL-30452-01.
Managing the Switch
Displaying Environmental Information for a Switch