Cisco Nexus 7710 - Page 163

Cable TypeTransceiver or ConnectorPort Type
Multi-mode fiber (MMF)QSFP-40G-CSR4
QSFP-40G-SR4
QSFP-40G-SR-BD
QSFP+
Single-mode fiber (SMF)QSFP-40G-LR4
Direct attach copper, activeQSFP-H40G-ACU7M
QSFP-H40G-ACU10M
40GBASE-CR4 QSFP+ to four
SFP+ Twinax direct attach copper
breakout cable active
QSFP-4X10G-AC7M
QSFP-4X10G-AC10M
40GBASE-AOC (Active Optical
Cable) QSFP+ cable
QSFP-H40G-AOC1M
QSFP-H40G-AOC2M
QSFP-H40G-AOC3M
QSFP-H40G-AOC5M
QSFP-H40G-AOC7M
QSFP-H40G-AOC10M
40GBASE-AOC QSFP+ to four
SFP+ breakout cable
QSFP-4X10G-AOC1M
QSFP-4X10G-AOC2M
QSFP-4X10G-AOC3M
QSFP-4X10G-AOC5M
QSFP-4X10G-AOC7M
QSFP-4X10G-AOC10M
6
FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
Table 8: F3 Series 12-port, 100-Gigabit Ethernet (N77-F312CK-26) Transceivers and Cables
Cable TypeTransceiver or ConnectorPort Type
Multi-mode fiber (MMF)CPAK-100G-SR10CPAK
Single-mode fiber (SMF)CPAK-100G-LR4
Table 9: F4 Series 30-port, 100-Gigabit Ethernet (N77-F430CQ-36) Transceivers and Cables
Cable TypeTransceiver or ConnectorPort Type
40-Gigabit Fabric Extender
Transceiver (FET) for FEX
connections
FET-40GFET
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
151OL-30452-01.
Switch Specifications
Switch Specifications