Cisco Nexus 7710 - Page 6

Connecting DC Power Supplies with Power Sources 135
Connecting a 3.5-kW HVAC/HVDC Power Supply to DC Power Sources 137
Switch Specifications 139
APPENDIX A
Environmental Specifications 139
Switch Dimensions 140
Power Requirements 140
Maximum Power Available for 3-kW AC Power Supplies 141
Maximum Power Available for 3-kW DC Power Supplies 142
Maximum Power Available for 3.5-kW Inputs (AC) 143
Maximum Power Available for 3.5-kW Inputs (DC) 145
Weights and Quantities for the Chassis, Modules, Fan Trays, and Power Supplies 146
Transceivers, Connectors, and Cables Used with Each I/O Module 148
100-Gb CPAK Transceiver Specifications 157
100-Gb QSFP+ Transceiver Specifications 158
40-Gb QSFP+ Transceiver Specifications 160
10-Gb SFP+ Optical Transceivers and Fabric Extender Transceivers 162
10BASE-DWDM SFP+ Transceiver Specifications 166
1-Gb SFP Transceivers 170
1000BASE-CWDM SFP Transceiver Cables 170
1000BASE-DWDM SFP Transceiver Specifications 172
1000BASE-T and 1000BASE-X SFP Transceiver Specifications 174
RJ-45 Module Connectors 176
Power Supply Cable Specifications 176
3-kW AC Power Cord Specifications 177
3.5-kW HVAC/HVDC Power Supply AC Power Cord Specifications 178
3-kW DC Power Cord Specifications 188
3.5-kW HVAC/HVDC Power Supply DC Power Cord Specifications 188
LEDs 191
APPENDIX B
Chassis LEDs 191
Supervisor Module LEDs 192
I/O Module LEDs 194
Fabric Module LEDs 196
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
OL-30452-01.vi
Contents