EasyManuals Logo

Cisco PenTeleData 8800 Series Deployment Guide

Cisco PenTeleData 8800 Series
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
11
The Cisco IP Phone 8861 and 8865 are supported on the following Cisco Meraki access point platforms.
https://meraki.cisco.com/products/wireless#models
https://meraki.cisco.com/products/appliances#models
The Cisco Meraki MR12, MR16, and Z1 access point platforms are not certified for use with Cisco IP Phone 8861 and 8865
deployments.
Note: If an access point model is not specifically listed above, then it is not supported.
VoWLAN is currently not supported in conjunction with Cisco Aironet 1500 Series outdoor access points.
No support for any access point model operating in MESH mode.
No support for 3
rd
party access points as there are no interoperability tests performed for 3
rd
party access points.
However, the user should have basic functionality when connected to a Wi-Fi compliant access point.
Some of the key features are the following:
5 GHz (802.11a/n/ac)
Wi-Fi Protected Access v2 (WPA2+AES)
Wi-Fi Multimedia (WMM)

Table of Contents

Other manuals for Cisco PenTeleData 8800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco PenTeleData 8800 Series and is the answer not in the manual?

Cisco PenTeleData 8800 Series Specifications

General IconGeneral
BrandCisco
ModelPenTeleData 8800 Series
CategoryIP Phone
LanguageEnglish

Related product manuals