Rx Sop Threshold
It is recommended to use the default value (Auto) for Rx Sop Threshold.
WLAN Settings
It is recommended to have a separate SSID for the Cisco IP Phone 8861 and 8865.
However, if there is an existing SSID configured to support voice capable Cisco Wireless LAN endpoints already, then that
WLAN can be utilized instead.
The SSID to be used by the Cisco IP Phone 8861 and 8865 can be configured to only apply to a certain 802.11 radio type (e.g.
802.11a only).
It is recommended to have the Cisco IP Phone 8861 and 8865 operate on the 5 GHz band only due to have many channels
available and not as many interferers as the 2.4 GHz band has.
Ensure that the selected SSID is not utilized by any other wireless LANs as that could lead to failures when powering on or
during roaming; especially if a different security type is utilized.
To Next Page
Loading...
Need help?
General