• If selecting EAP-TLS as the security mode, then must configure the type of user certificate to use.
If User installed is selected, then will need to have a user certificate installed either manually via the admin webpage
or via SCEP.
Select Save after making the necessary changes.
• The root CA certificate of the CA chain that issues the RADIUS server certificates must be installed to enable server
validation when using EAP-TLS. Server validation is automatically enabled once a server certificate is installed.
• Select one of the following 802.11 modes to set the frequency band, then Save.
• Auto
• 2.4 GHz
• 5 GHz
To Next Page
Loading...
Need help?
General