Cisco PenTeleData 8800 Series Deployment Guide

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
195
Cisco Unified Communications Manager Express
To install the firmware on Cisco Unified Communications Manager Express, extract the contents of the TAR file and upload
into the router’s flash. Each file will need to be enabled for TFTP download. Configure the phone load and reset the phones to
upgrade the firmware.
8861 Example:
tftp-server flash:sip88xx.11-7-1-17.loads
tftp-server flash:boot1288xx.BE-01-007.sbn
tftp-server flash:fbi88xx.BE-01-010.sbn
tftp-server flash:kern88xx.11-7-1-17.sbn
tftp-server flash:kern288xx.11-7-1-17.sbn
tftp-server flash:m0patch288xx.BE-01-001.sbn
tftp-server flash:rootfs88xx.11-7-1-17.sbn
tftp-server flash:rootfs288xx.11-7-1-17.sbn
tftp-server flash:sb288xx.BE-01-024.sbn
tftp-server flash:sb2288xx.BE-01-009.sbn
tftp-server flash:ssb288xx.BE-01-005.sbn
tftp-server flash:vc488xx.11-7-1-17.sbn
!
voice register pool-type 8861
phoneload-support
transport tcp
description Cisco SIP Phone 8861
reference-pooltype 9971
!
voice register global
load 8861 sip88xx.11-7-1-17
8865 Example:
tftp-server flash:sip8845_65.11-7-1-17.loads
tftp-server flash:fbi8845_65.BEV-01-006.sbn
tftp-server flash:kern8845_65.11-7-1-17.sbn
tftp-server flash:rootfs8845_65.11-7-1-17.sbn
tftp-server flash:sb28845_65.BEV-01-015.sbn
tftp-server flash:vc48845_65.11-7-1-17.sbn
!
voice register pool-type 8865
phoneload-support
transport tcp
description Cisco SIP Phone 8865

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English