EasyManuals Logo

Cisco PenTeleData 8800 Series Deployment Guide

Cisco PenTeleData 8800 Series
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
55
If using best effort applications frequently or if DSCP values for priority applications (e.g. voice, video, call control) are not
preserved to the access point, then is recommended to enable the lower priority queues (0-3) along with the higher priority
queues (4-6) to defer off channel scanning as well as potentially increasing the scan defer time.
For deployments where EAP failures occur frequently, it is recommended to enable priority queue 7 to defer off channel
scanning during EAP exchanges.
DHCP Address Assignment Required should be disabled.
Management Frame Protection should be set to Optional or Disabled.
Use a DTIM Period of 2 with a beacon period of 100 ms.
Ensure Client Load Balancing and Client Band Select are disabled.
Media Session Snooping can be enabled to utilize SIP CAC.
It is recommended to set Re-anchor Roamed Voice Clients to disabled as this can cause brief interruptions with wireless LAN
connectivity when a call is terminated after performing an inter-controller roaming.

Table of Contents

Other manuals for Cisco PenTeleData 8800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco PenTeleData 8800 Series and is the answer not in the manual?

Cisco PenTeleData 8800 Series Specifications

General IconGeneral
BrandCisco
ModelPenTeleData 8800 Series
CategoryIP Phone
LanguageEnglish

Related product manuals