EasyManuals Logo

Cisco PenTeleData 8800 Series Deployment Guide

Cisco PenTeleData 8800 Series
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
60
If the client uses TCP for SIP, then the access point will snoop the SIP packets when media session snooping is enabled on the
WLAN and will not forward the SIP frames upstream or downstream if there is not bandwidth available for the new voice
stream. This could potentially result in loss of registration to the Cisco Unified Communications Manager.
If the client uses UDP for SIP, then the access point will snoop the SIP packets when media session snooping is enabled on the
WLAN and will sent a 486 busy message to the client, which in turn can be interpreted as a Network Busy message and the
client could either roam to another access point or simply terminate the call setup for that session.
If the Cisco IP Phone 8861 and 8865 uses TCP for SIP communications and the channel is busy where another call can not be
allowed, then the Cisco IP Phone 8861 and 8865 could potentially lose registration to the Cisco Unified Communications
Manager if SIP CAC is enabled.
Admission Control Mandatory for Video should be disabled.

Table of Contents

Other manuals for Cisco PenTeleData 8800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco PenTeleData 8800 Series and is the answer not in the manual?

Cisco PenTeleData 8800 Series Specifications

General IconGeneral
BrandCisco
ModelPenTeleData 8800 Series
CategoryIP Phone
LanguageEnglish

Related product manuals