Cisco RJ-45-to-AUX - Page 362

configuration
show vlan Shows the VLAN
configuration
show vlan
show vtp Shows the VLAN
Trunking
Protocol (VTP)
configuration
show vtp domain
spantree <vlan−list> Configures STP set spantree enable <mod/number> hello
<hellotime>
spantree cost <cost−value> Configures the
port cost
set spantree portcost <mod/number cost>
spantree priority <priority−value> Configures the
port priority
set spantree portpri <mod/number><priority>
spantree start−forwarding Enables PortFast set spantree portfast <mod/number> enable
spantree−template Sets the
FwdDelay timer
set spantree fwddelay [vlan] delay−value
spantree−template Sets the STP
HelloTime
timer set spantree hello <interval>
spantree−template Sets the MaxAge
timer
set spantree maxage agingtime [vlan] time
uplink−fast Enables
UplinkFast
set spantree uplinkfast enable
trunk
<on|off|desirable|auto|nonegotiate>
Configures the
trunk port
set trunk <mod/num>
<on|off|desirable|auto|no−negotiate>
vlan <vlan_number> name
<vlan_name>
Configures the
VLAN name
set vlan <vlan_num> name <vlan_name>
vlan−membership static <vlan> Assigns a port to
a VLAN
set vlan <vlan_num>
<mod/number>
vtp <mode> Configures the
VTP mode:
Transparent,
Server, or Client
set vtp mode <mode>
vtp <name> Configures the
VTP domain
set vtp domain <name>
vtp password <password> Configures the
VTP domain
password
set vtp passwd <password>
346