Cisco RJ-45-to-AUX - Configuring Network Settings on the 1900 and 2820 Series

Receive Forward Transmit
——————————————————————————————
1 : 0 0 0
2 : 0 0 0
3 : 9352 9352 90514
4 : 0 0 0
5 : 0 0 0
6 : 3678 3677 81423
7 : 0 0 0
8 : 0 0 0
9 : 0 0 0
10 : 0 0 0
11 : 0 0 0
12 : 0 0 0
AUI: 0 0 82461
A : 0 0 0
B : 0 0 0
Select [R] Reset all statistics, or [X] Exit to previous menu:
[B] Bandwidth Usage Report—This option displays the Bandwidth Usage Report, which displays
port−by−port bandwidth usage:
•
Catalyst 1900 − Bandwidth Usage Report
—————————————————————— Information ————————————————————————————————
Current Bandwidth Usage 0 Mbps
Peak Bandwidth Usage during this interval 0 Mbps
Peak Time recorded since start up 1d 06h 58m 02s
——————————————————————— Settings ————————————————————————————————————
[T] Capture time interval 24 hour(s)
[R] Reset capture
[X] Exit to previous menu
Enter Selection:
[X] Exit—This option returns you to the Main Menu.•
Configuring Network Settings on the 1900 and 2820 Series
To configure a 1900 or 2820 series switch, follow these steps:
Plug in your switch. You should see the following display:
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc.1993−1999
All rights reserved.
Standard Edition Software
Ethernet address: 00−F0−1D−30−BB−C2
PCA Number: 25−41329−10
PCA Serial Number: NBB02404421
Model Number: WS−C1924−A
System Serial Number: BBB02304561
———————————————————
User Interface Menu
[M] Menus
[I] IP Address
[P] Console Password
Enter Selection:
1.
298