Cisco Rugged Series - Power Supply Features

Figure 10: IR8340 Router With Both Power Supply Modules
Power supply slots2Power supply modules1
Captive screws4LED panel3
Alignment tabs5
Power Supply Features
The router has two slots for power-supply modules and supports the following power supplies:
• PWR-RGD-LOW-DC: low-voltage DC, 24 to 60VDC input, 150 watt output
• PWR-RGD-AC-DC: high-voltage AC or DC, 100 to 240VAC/100-250VDC input, 150 watt output
• PWR-RGD-AC-DC-250: high-voltage AC or DC, 100 to 240VAC/100 to 250VDC input, 250 watt output
For detailed specifications, see the IR8340 data sheet.
Note
The router supports these power-supply module combinations:
• Single low-voltage DC
• Single high-voltage DC or AC
• Two high-voltage DC or AC
• Two low-voltage DC
• One high-voltage DC or AC and one low-voltage DC
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
14
Product Overview
Power Supply Features