Cisco Rugged Series - Power-Supply Module Specifications

Table 17: Cisco IR8340 Router Power Requirements
Power Requirements
PWR-RGD-AC-DC:
100 to 240 VAC, 50 to 60 Hz,
100 to 250 VDC
PWR-RGD-AC-DC-250:
100 to 240 VAC, 50 to 60 Hz,
100 to 250 VDC
PWR-RGD-LOW-DC:
24 to 60 VDC
Nominal input voltage
Table 18: Power Consumption
SpecificationDescription
Typical : 60W, Max : 86WSystem power consumption (with no modules and
POE)
Typical : 6W, Max : 7WT1/E1 NIM power consumption
Typical : 6W, Max : 7WRS232 NIM Power consumption
Power-Supply Module Specifications
Table 19: Power Supply Module Specifications
Dimensions (H x W x D)WeightModel
1.58 x 7 x 5 in. (4 x 17.8 x 12.7 cm)
(without mounting flanges)
2.55 lb (1.15 kg)PWR-RGD-AC-DC
1.58 x 7 x 5 in. (4 x 17.8 x 12.7 cm)
(without mounting flanges)
2.5 lb (1.13 kg)PWR-RGD-LOW-DC
1.58 x 7x 6.18 in. (4 x 17.8 x 15.7
cm) (with mounting flanges)
3.2 lb (1.45 kg)PWR-RGD-LOW-DC-250
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
68
Technical Specifications
Power-Supply Module Specifications