Cisco SD2008T-NA Installation Guide

C-8
Cisco Nexus 2000 Series Hardware Installation Guide
OL-19013-05
Appendix C Cable and Port Specifications
Jumper Power Cord
Figure C-15 CAB-C13-CBN
Table C-2 lists the AC power cords for the Cisco Nexus 2232TM.
Jumper Power Cord
Figure C-16 shows the plug connector on the optional jumper power cord for the Cisco Nexus 2000
Series FEX. The plug plugs into the Cisco Nexus 2000 Series FEX power supply, while the connector
plugs into the receptacle of a power distribution unit for a cabinet.
Connector:
HS 10S
Cordset rating: 10 A,125-250 V
Length: 686 mm
Plug:
SS10A
192532
Table C-2 AC Power Cords for the Cisco Nexus 2232TM
Power Cords Description
CAB-3KX-AC= AC power card for North America
CAB-3KX-AC-AP= AC power card for Australia
CAB-3KX-AC-AR= AC power card for Argentina
CAB-3KX-AC-SW= AC power card for Switzerland
CAB-3KX-AC-UK= AC power card for United Kingdom
CAB-3KX-AC-JP= AC power card for Japan
CAB-3KX-AC-EU= AC power card for Europe
CAB-3KX-AC-IT= AC power card for Italy
CAB-3KX-AC-IN= AC power card for India
CAB-3KX-AC-CN= AC power card for China
CAB-3KX-AC-DN= AC power card for Denmark
CAB-3KX-AC-IS= AC power card for Israel

Cisco SD2008T-NA Specifications

General

Brand	Cisco
Model	SD2008T-NA
Category	Extender
Language	English