Contents
vi
Book Title
78-xxxxx-xx
Starting the Cisco Nexus 2000 Series Fabric Extender 3-15
Removing and Installing Components 3-17
Removing and Installing Power Supplies 3-17
Removing an AC Power Supply 3-17
Installing an AC Power Supply 3-18
Removing a DC Power Supply 3-19
Installing a DC Power Supply 3-19
Removing and Installing the Fan Tray 3-20
Removing a Fan Tray 3-21
Installing a Fan tray 3-21
Removing the Cisco Nexus 2000 Series Fabric Extender 3-22
Repacking the Cisco Nexus 2000 Series Fabric Extender for Return Shipment 3-22
CHAPTER
4 Connecting a Cisco Nexus 2000 Series Fabric Extender 4-1
Preparing for Network Connections 4-2
Connecting to the 1-Gigabit Ethernet Port 4-2
Connecting to a 10-Gigabit Ethernet Port 4-2
Removing and Installing SFP+ Transceivers 4-2
Installing an SFP+ Transceiver 4-3
Removing an SFP+ Transceiver 4-3
Removing and Installing Cables into SFP+ Transceivers 4-4
Removing a Cable from an SFP+ Transceiver 4-5
Installing a Cable into an SFP+ Transceiver 4-5
Maintaining SFP+ Transceivers and Cables 4-6
APPENDIX
A Cabinet and Rack Installation A-1
Cabinet and Rack Requirements A-1
General Requirements for Cabinets and Racks A-1
Requirements Specific to Perforated Cabinets A-2
Requirements Specific to Standard Open Racks A-2
Cable Management Guidelines A-3
APPENDIX
B Technical Specifications B-1
Power Specifications B-1
Environmental Specifications B-4
Physical Specifications B-5
Transceiver Specifications B-6
SFP+ Optical Transceiver Specifications B-6
To Next Page
Loading...
Need help?
General
