Cisco SG500-52P Administration Guide

Access Control
Defining ACL Binding
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 474
24
• Permit Any—Select one of the following options:
- .Disable (Deny Any)—If packet does not match an ACL, it is denied
(dropped).
- Enable—If packet does not match an ACL, it is permitted (forwarded).
NOTE Permit Any can be defined only if IP Source Guard is not activated on
the interface.
STEP 7 Click Apply. The ACL binding is modified, and the Running Configuration file is
updated.
NOTE If no ACL is selected, the ACL(s) that is previously bound to the
interface is unbound.

Cisco SG500-52P Specifications

General

Model	SG500-52P
Ports	52
PoE Ports	48
PoE+	Yes
Switching Capacity	104 Gbps
Layer	Layer 3
Power over Ethernet (PoE)	Yes
Rack Mountable	Yes
VLAN Support	Yes
Manageable	Yes
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	440 x 44 x 350 mm
MAC Address Table Size	16K entries
Operating Temperature	0°C to 50°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90%, non-condensing