Cisco SG500-52P Administration Guide

26
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 510
SNMP
This section describes the Simple Network Management Protocol (SNMP) feature
that provides a method for managing network devices.
It covers the following topics:
• SNMP Versions and Workflow
• Model OIDs
• SNMP Engine ID
• Configuring SNMP Views
• Creating SNMP Groups
• Managing SNMP Users
• Defining SNMP Communities
• Defining Trap Settings
• Notification Recipients
• SNMP Notification Filters
SNMP Versions and Workflow
The device functions as SNMP agent and supports SNMPv1, v2, and v3. It also
reports system events to trap receivers using the traps defined in the supported
MIBs (Management Information Base).

Cisco SG500-52P Specifications

General

Model	SG500-52P
Ports	52
PoE Ports	48
PoE+	Yes
Switching Capacity	104 Gbps
Layer	Layer 3
Power over Ethernet (PoE)	Yes
Rack Mountable	Yes
VLAN Support	Yes
Manageable	Yes
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	440 x 44 x 350 mm
MAC Address Table Size	16K entries
Operating Temperature	0°C to 50°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90%, non-condensing