Cisco SG500-52P Administration Guide

SNMP
SNMP Notification Filters
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 528
26
- Select from list—Enables you to navigate the MIB tree. Press the Up
arrow to go to the level of the selected node's parent and siblings; press
the Down arrow to descend to the level of the selected node's children.
Click nodes in the view to pass from one node to its sibling. Use the
scrollbar to bring siblings in view.
- If Object ID is used, the entered object identifier is included in the view
if the Include in filter option is selected.
STEP 4 Select or deselect Include in filter. If this is selected, the selected MIBs are
included in the filter, otherwise they are excluded.
STEP 5 Click Apply. The SNMP views are defined and the running configuration is
updated.

Cisco SG500-52P Specifications

General

Model	SG500-52P
Ports	52
PoE Ports	48
PoE+	Yes
Switching Capacity	104 Gbps
Layer	Layer 3
Power over Ethernet (PoE)	Yes
Rack Mountable	Yes
VLAN Support	Yes
Manageable	Yes
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	440 x 44 x 350 mm
MAC Address Table Size	16K entries
Operating Temperature	0°C to 50°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90%, non-condensing