EasyManuals Logo

Cisco SPA 303 User Guide

Cisco SPA 303
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Getting Started
Getting to Know the Cisco SPA 303
Cisco Small Business IP Phone SPA 303 User Guide (SIP) 8
1
4 Line keys Indicates phone line status. Typically when lit:
Green: Line is idle.
Red (steady): Line is active or in use.
Red (blinking): Line is on hold.
Orange: Line is unregistered (cannot be
used).
Flashing Orange: The phone is not
connected to the network.
5 Softkey buttons Press a softkey button to perform the action shown
on the label on the LCD screen above. See Softkey
Buttons, page 9.
6 Navigation button Press an arrow to scroll left, right, up, or down
through items shown on the LCD screen.
7 Messages button Press to access voice mail (must be set up by your
phone administrator).
8 Hold button Press to place a call on hold.
9 Setup button Press to access a menu to configure features and
preferences (such as your directory and speed dials),
access your call history, and set up functions (such
as call forwarding).
10 Mute button Press to mute or unmute the phone. When phone is
muted, the button glows red. A flashing mute button
indicates the network connection cannot be found.
11 Headset button Push to turn the headset on or off. When the headset
is on, the button glows green.
12 Volume button Press + to increase the volume and - to lower the
volume of the handset, headset, speaker (when the
handset is off the phone), or ringer volume (when
the handset is on the phone).
13 Speaker button Push to turn the speaker on or off. When the speaker
is on, the button glows green.
14 Keypad Use to dial phone numbers, enter letters, and choose
menu items.
# Phone Feature Description

Table of Contents

Other manuals for Cisco SPA 303

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA 303 and is the answer not in the manual?

Cisco SPA 303 Specifications

General IconGeneral
Keypad number of keys12
Display resolution128 x 64 pixels
Call waitingYes
Lines quantity3 lines
Phonebook capacity60 entries
Do not disturb functionNo
Voice codecsG.711, G.722
Supported network protocolsIPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030)
Headphone outputs1
Ethernet LAN (RJ-45) ports2
Suitable for use in country/locationEurope
Input voltage100 - 240 V
Dimensions (WxDxH)220 x 30 x 198 mm
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product typeIP Phone
Product colorGray
CertificationFCC (15, B), UL, CE, A-Tick
Compliance industry standardsIEEE 802.1p/Q, IEEE 802.3
Weight and Dimensions IconWeight and Dimensions
Weight680 g

Related product manuals