EasyManuals Logo

Cisco SPA 303 User Guide

Cisco SPA 303
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Using Basic Phone Functions
Transferring Calls
Cisco Small Business IP Phone SPA 303 User Guide (SIP) 30
3
Transferring Calls
You can perform three types of transfers:
Attended—You call the person to whom you are transferring the call and speak to them
before transferring the call.
Blind—You transfer the call without speaking to the other party to which you are
transferring the call.
Voicemail—You transfer the call to anothers voicemail so that the caller can leave a
recorded message.
Performing an Attended Transfer
STEP 1 During an active call, press Trnsfer. The call is placed on hold and a new line is opened to dial
the number.
STEP 2 Enter the number to which you want to transfer the call.
STEP 3 Do one of the following:
To transfer the call without waiting for the other person to answer, press the Trnsfer
softkey after the call begins to ring. Then hang up. (If you hang up before the second
call rings, the transfer fails and the first call is disconnected.) If you misdial, press the
EndCall softkey, then the Resume softkey to return to the original call.
To transfer after speaking privately to the other person, press the Trnsfer softkey at
any time during the conversation.
Performing an Unattended (Blind) Transfer
STEP 1 During an active call, press the bxfer softkey.
STEP 2 Enter the number to which you want to transfer the call and press dial. The call is transferred
with no further action required on your part.

Table of Contents

Other manuals for Cisco SPA 303

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA 303 and is the answer not in the manual?

Cisco SPA 303 Specifications

General IconGeneral
Keypad number of keys12
Display resolution128 x 64 pixels
Call waitingYes
Lines quantity3 lines
Phonebook capacity60 entries
Do not disturb functionNo
Voice codecsG.711, G.722
Supported network protocolsIPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030)
Headphone outputs1
Ethernet LAN (RJ-45) ports2
Suitable for use in country/locationEurope
Input voltage100 - 240 V
Dimensions (WxDxH)220 x 30 x 198 mm
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product typeIP Phone
Product colorGray
CertificationFCC (15, B), UL, CE, A-Tick
Compliance industry standardsIEEE 802.1p/Q, IEEE 802.3
Weight and Dimensions IconWeight and Dimensions
Weight680 g

Related product manuals