Cisco SPA 303

Installing Your Phone
Installing Your Cisco SPA 303 IP Phone
Cisco Small Business IP Phone SPA 303 User Guide (SIP) 13
2
Installing Your Cisco SPA 303 IP Phone
Figure 1 Cisco SPA 303 Phone Connections
Connecting the Handset
STEP 1 Turn the phone body over to expose the ports on the back of the unit.
STEP 2 Insert the long end of the phone cord into the handset port on the phone body that is marked
with a phone symbol. (labeled 5 in Figure 1).
STEP 3 (Optional) Route the phone cord through the cable slot (labeled 4 in Figure 1).
STEP 4 Insert the other end of the phone cord into the port at the bottom of the handset (not shown).