Cisco SPA100 Series Provisioning Guide

Voice Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 87
6
<GPP_A> to <GPP_P> General purpose provisioning parameters. These parameters
can be used as variables in provisioning and upgrade rules.
They are referenced by prepending the variable name with a
‘$’ character, such as $GPP_A.
Default setting: blank
<GPP_SA> to <GPP_SD> The two-letter upper-case macro names SA through SD
identify GPP_SA through GPP_SD as a special case when
used as arguments of the key URL option.
<Max_Forward> The maximum times a call can be forwarded. The valid range
is from 1 to 255.
Default setting: 70
<Max_Redirection> Number of times an invite can be redirected to avoid an
infinite loop.
Default setting: 5.
<Max_Auth_> The maximum number of times (from 0 to 255) a request may
be challenged.
Default setting: 2
<SIP_User_Agent_Name> The User-Agent header used in outbound requests. If empty,
the header is not included. Macro expansion of $A to $D
corresponding to GPP_A to GPP_D allowed.
Default setting: $VERSION
<SIP_Server_Name> The server header used in responses to inbound responses.
Default setting: $VERSION
<SIP_Reg_User_Agent_Name> The User-Agent name to be used in a REGISTER request. If
this value is not specified, the SIP User Agent Name
parameter is also used for the REGISTER request.
Default setting: blank
<SIP_Accept_Language> Accept-Language header used. There is no default (this
indicates that the ATA does not include this header) If empty,
the header is not included.
Default setting: blank

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English