Cisco TelePresence MX700 - Page 65

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
65
Cisco TelePresence MX700 and MX800 Administrator Guide
Audio SoundsAndAlerts RingVolume
Sets the ring volume for an incoming call.
Requires user role: USER
Value space: <0..100>
Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.
Example:
Audio SoundsAndAlerts RingVolume: 30
Audio DefaultVolume
Set the default speaker volume. The volume returns to this value when you switch on or restart
the video system. Use the Touch controller to change the volume while the video system is
running.
Requires user role: USER
Value space: <0..100>
Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the
range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched
off.
Example:
Audio DefaultVolume: 50
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings