Cisco UCS 2208XP Installation Guide

The power button and LED allows you to manually take a server temporarily out of service but leave it in a
state where it can be restarted quickly.
Connectors
A console port gives a direct connection to a blade server to allow operating system installation and other
management tasks to be done directly rather than remotely. The port uses the KVM dongle device included
in the chassis accessory kit. See KVM Cable, on page 85 for more information.
Cisco UCS B230 Blade Servers
For full service and installation instructions, see the Cisco UCS B230 Blade Server Installation and Service
Note. You can install up to eight UCS B230 Blade Servers to a chassis.
Figure 5: Cisco UCS B230 (N20-B6730) Front Panel
Beaconing LED and button9SSD 1 Activity LED1
System Activity LED10SSD 1 Fault/Locate LED2
Blade health LED11SSD sled in Bay 13
Reset button access12SSD 2 Activity4
Power button and LED13SSD 2 Fault LED5
Console connector14Ejector lever captive screw6
Asset tag15Ejector lever7
SSD sled in Bay 18
Cisco UCS 5108 Server Chassis Installation Guide
11
Overview
Blade Servers

Cisco UCS 2208XP Specifications

General

Brand	Cisco
Model	UCS 2208XP
Category	Chassis
Language	English