CHAPTER 3
Installing and Removing Components
This chapter describes how to remove components from the chassis and how to install components into the
chassis. This section contains the following section:
•
Components, page 69
•
Installing and Removing a Blade Server, page 71
•
Installing and Removing Power Supplies, page 73
•
Installing and Removing a Power Distribution Unit (PDU), page 75
•
Installing and Removing a FEX or Fabric Interconnect, page 77
•
Migrating to UCS 6300 Series Fabric Interconnects and the UCS 2304 IOM, page 79
•
Installing and Removing a Fan Module, page 82
Components
The following figure shows an empty Cisco UCS 5108 server chassis and identifies the front, back, and module
slots.
Cisco UCS 5108 Server Chassis Installation Guide
69
To Next Page
Loading...
Need help?
General
