Cisco UCS 2208XP Installation Guide

Specifications for the Cisco UCS 5108 Blade Server Chassis
Power Supply Units
Table 19: AC-input Gold Power Supply (N20-PAC5-2500W) Specifications
SpecificationDescription
Voltage Range 100-120 VAC, 200-240 VAC nominal
(range: 90-132 VAC, 180-264 VAC)
AC-input voltage
50 to 60 Hz nominal (range: 47 to 63 Hz)AC-input frequency
12.5 A @ 100 VAC
6.0 A @208 VAC
Maximum AC-input current
1250 VA at 100 VACMaximum input VA
800 W @ 100-120 VAC
1050 W @ 200-240 VAC
Maximum output power per power supply
15 A (sub cycle duration)Maximum inrush current
12 ms @ 770 WMaximum hold up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
Certified
Efficiency Rating
RSP2 (C-Series 1U and C3x60 Storage Server)Form Factor
IEC320 C14Input connector
Table 20: AC-input Platinum Power Supply (UCSB-PSU-2500ACPL) Specifications
SpecificationDescription
UCS Software Release 2.0(2)Minimum Software requirement
200 to 240 VAC nominal (Range: 180 to 264 VAC)AC-input voltage
50 and 60 Hz nominal (Range: 47 to 63 Hz)AC-input frequency
< 16 Amps @ 200 VACAC-input current
Cisco UCS 5108 Server Chassis Installation Guide
88
Technical Specifications
Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units

Cisco UCS 2208XP Specifications

General

Brand	Cisco
Model	UCS 2208XP
Category	Chassis
Language	English