Cisco UCS 5108 Spec Sheet

Cisco UCS 5108 Blade Server Chassis
CONFIGURING the CHASSIS
13
STEP 3 CHOOSE ADDITIONAL COMPONENTS (OPTIONAL)
A variety of optical and copper Small Form-Factor Pluggable (SFP) transceivers and copper
twinax cables are available for use with the Fabric Extenders.
Choose SFP+ Optical Transceivers
You can choose up to eight SFP+ optical transceivers for each 2208XP, or up to four for each
2204XP or 2104XP, as shown in
Table 6.
Choose SFP Optical or Copper Transceivers
You may choose up to eight SFP optical or copper transceivers for each 2208XP, or up to four for
each 2204XP or 2104XP, as shown in
Table 7.
Table 6 SFP+ Transceivers
Product ID (PID) PID Description
SFP-10G-SR 10 Gigabit Ethernet - short range SFP+ module (MMF)
SFP-10G-LR 10 Gigabit Ethernet - long range SFP+ module (SMF)
Table 7 SFP Optical Transceivers
Product ID (PID) PID Description
GLC-T 1 GbE copper SFP Module
GLC-SX-MM 1 GbE short range (550 m max) SFP Module
GLC-LH-SM 1 GbE long range (10 km max) SFP Module
SFP-GE-T 1 GbE SFP, extended temperature range Module
SFP-GE-S 1 GbE SFP, LC connector SX transceiver (MMF), ext. temp. range and DOM
SFP-GE-L 1 GbE SFP, LC connector LX/LH transceiver (SMF), ext. temp. range and DOM

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable