Cisco UCS 5108 Spec Sheet

Cisco UCS 5108 Blade Server Chassis
44
TECHNICAL SPECIFICATIONS
Power Specifications
The specifications for the various 5108 blade chassis power supplies are listed in Table 23 through
Table 26.
EMC: Emissions ■ 47CFR Part 15 (CFR 47) Class A
■ AS/NZS CISPR22 Class A
■ CISPR2 2 Class A
■ EN55022 Class A
■ ICES003 Class A
■ VCCI Class A
■ EN61000-3-2
■ EN61000-3-3
■ KN22 Class A
EMC: Immunity ■ EN50082-1
■ EN61000-6-1
■ EN55024
■ CISPR24
■ EN300386
■ KN 61000-4 Series
Table 23 AC Input Gold Power Supply (N20-PAC5-2500W) Specifications
Description Specification
AC-input voltage 200 to 240 VAC nominal (Range: 180 to 264 VAC)
AC-input frequency 50 to 60 Hz nominal (Range: 47 to 63 Hz)
AC-input current 15.5 Amps @ 200 VAC
Maximum Input VA 2790 VA @ 200 VAC
Maximum output power
per power supply
2500 W @ 200 to 240 VAC
Maximum inrush current 35 A (sub cycle duration)
Maximum hold up time 12 ms @ 2500 W
Power supply output
voltage
12 VDC @ 208 V
Efficiency rating Climate Savers Gold
Table 22 Cisco UCS 5108 Chassis Specifications (continued)
Parameter Value

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable